900w Adhesive Injecting Dispenser Hot Melt Glue Spraying Gluing Machine USED

Description

Store category
Sign Up Now !
You may also like
Adhesive Injecting Dispenser Hot Melt Glue Spraying Gluing Machine 110V (Used
Product Description
MPN
Does Not Apply
Brand
Unbranded
Model
x001
Power
900W
Sol speed
3KG/HR
Solvent capacity
3KG/HR
Maximum viscosity
10000 CPS
Working temperature
160-180°C
Temperature control range
0-300°C
Second-hand products: The customer who purchased before has used it, but he did not use it with an air compressor, which caused the glue in the machine to not come out. If it is used again, just use the air compressor to heat it, and the glue will come out.
Adhesive Injecting Dispenser Equipment Hot Melt Glue Spray Injecting Machine110V
Hot melt glue dispensers are widely used in: toys (bonding, fixing, wiring, insulation), sealing. Packaging; handbags skin bags; small appliances. Wires. Connectors. Connectors; audio. Photo frame: identification labels; Small paper products are bonded and fixed; small ornaments, crafts, hairpins, water polo, etc.; electronic products are fixed. Adhesive. Insulation; other manual or semi-automatic use of glue is required.
Features：
Model: X001
Power: 900W
Sol speed: 3KG/HR
Solvent capacity: 3KG/HR
Maximum viscosity; 10000 CPS
Working temperature: 160-180
°C
Temperature control range: 0-300
°C
safety precaution:
Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive
1. The gas circuit should avoid too much water vapor entering
2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.
3.The maximum total air pressure is set to 4KG
4. Before heating the melted glue, the pressure of the storage bucket must be released first.
Preparation for operation
1. Confirm the safety protection measures
2. Check if the machine is 110VAC and there is no fluctuation in the pressure
3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)
5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.
6. Check if the air supply system is basically dry and the air pressure is stable
7. Power on and test the circuit of each part.
Boot steps
1. Connect the power and turn the power switch to ON
2. Check if the temperature of the temperature controller is within the above range
3. Check whether the pressure relief is turned in the direction of pressure holding
4. Connect the origin, set the pressure value, and start the operation
Shutdown steps
1. Release the foot switch to cut off the main power
2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0
NOTE:The product needs to be used with an air compressor
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On May-14-21 at 02:45:16 PDT, seller added the following information: