Nordson 3400 Series Hot Glue Melter Extruder Model 3400-1EA32 - Inventory #3454

Description

Nordson 3400 Series Hot Glue Melter Extruder Model 3400-1EA32 - Inventory #3454
We are pleased to offer this
Nordson Series 3400 Hot Glue Melter
The
Nordson Series 3400 Melter
offers unprecendented versatility and performance in mid-range hot melt equipment. The melter is equipped with the state-of-the-art MicroSet Multiscan Control, which provides individual setpoints for each heated component and microprocessor-based diagnostics. The electrical cabinet is designed to provide maximum access to electrical components for ease of service and maintenance. 1 Hose is included.
Guns/Applicator nozzles are not included.
This item has been tested and is in good working condition. Please contact us if you have any questions.
Introduction
The Nordson Series 3400 Melter is the main component of the hot melt system. The melter liquefies the adhesive to its proper dispensing temperature, maintains it at the setpoint (operating) temperatures, and pumps it through hoses (1 Hose included) to dispensing guns (not included). The tank, hoses, and guns are electrically heated: the tank or grid by a cast-in heater element, the hoses by a spirally wound heating element, and the guns by a cartridge heater. The temperatures of the tank, hoses, and guns are individually monitored and controlled using a temperature-sensing device called a resistance temperature detector (RTD). Series 3400 melters can be used to melt and pump almost any thermoplastic adhesive or similar material that can be liquified and extruded at temperatures below 218C (425F). The melters are not intended for use with polyurethane-reactive (PUR) adhesives because these adhesives require unique systems designed to prevent curing of the adhesive inside the dispensing equipment. Series 3400 melters should be used only as described in the Nordson 3400 manual.
Features
Programmed sequential startup for reduced component stress.
System-ready delay (with parent machine interlock) for pump protection.
Forty-five degree manifold face for easier hose routing.
Overtemperature protection.
Contacts for remote indication of fault and ready conditions.
Precise resistance temperature detector (RTD) temperature sensing.
Teflon coated tank for reduced char buildup.
Compatibility with existing Nordson RTD hoses and guns.
Electrical quick-disconnects for easy installation and maintenance.
Cast-in heaters for increased service life.
Compliance with major approval codes worldwide.
Specifications
Model Number:
3400-1EA32
Serial Number:
AN00L00042
Type of System:
14:1 Piston pump with non-circulating manifold
Tank Capacity/Tank Volume
12 lb (5.4 kg)
System Melt Rate:
15 lb/hr (6.8 kg/hr)
Maximum Pumping Rate:
up to 72 lb/hr (32.7 kg/hr)
Electrical Capacity:
2 Hoses / 2 Guns
Temperature Range:
160-450°F (70-230°C)
Temperature Control Stability:
±1°F (±0.5°C)
Viscosity Range:
800 to 30,000 cps
Electrical
Voltage:
230VAC
Frequency:
50/60 Hz
Amps:
17 Amps
Phase:
3 Ph
FREIGHT QUOTES:
We will provide freight quotes upon request. Please remember that all freight quotes are estimates. Remember to let us know if the shipping address is
Residential or Commercial
.
Please e-mail us your phone number for the freight company in case they need to contact you.
Crating is available for an additional charge.
Freight shipments will ship COLLECT (for freight charges only) to the buyer's location. Buyer is responsible for paying freight shipping charges, as required by buyer's chosen freight company.
Shipping:
This item will be wrapped, banded and shipped via Freight Truck, per Buyer's instructions, at Buyer's expense.
Crating is available (trucking companies may require that your item be crated). See item description for exact crating charge for this item. We will load on truck for no additional charge.
All sales are made f.o.b. our plant, Topeka, KS.
Title to the goods, unless otherwise provided, passes to purchaser upon delivery of the merchandise to the carrier.
Print & Finishing Equipment’s (PFE) responsibility ceases upon issuance of a bill of lading or delivery to carrier. PFE has no responsibility for goods in transit. Unless otherwise agreed in writing by PFE, all freight charges, insurance and handling charges from PFE’s plant, Topeka, KS will be on a “collect” basis and purchaser agrees to pay same to carrier.
Please e-mail us your phone number for the freight company in case they need to contact you.
We will provide freight quotes upon request.
Please remember that all freight quotes are estimates.
We can not know the actual charge for shipment until the item is fully prepared (crated) for shipment. The item is not currently crated and size and weight estimates have been approximated. Any additional charges before or after shipment by the trucking company are the buyers responsibility.
Freight shipments will ship COLLECT (for freight charges only) to the buyer's location. Buyer is responsible for paying freight shipping.
We will assist as much as possible in arranging shipping within the USA.
PLEASE NOTE:
For destinations in all other countries please contact us before purchasing to let us know how you intend to ship your item.
Buyer must contact us to arrange shipping or pickup after purchase price & crating/handling charges have been paid.
NOTE: Purchase price, crating & packaging (if applicable) must be paid in full before item will ship.
This item is available for local pickup if the buyer would like to avoid shipping costs.
The Buyer is responsible for all shipping charges including insurance, crating and packaging fee (if applicable).
Item will be shipped as soon as possible after payment is received. (Usually within 10 business days)
If payment is made via PayPal please be sure you have a PayPal confirmed address.
Payment Options:
Accepted payment methods:  PayPal
Payments should be completed within 3 days of purchasing item.
If the buyer chooses to have us arrange shipping and crating is required, you may pay the crating fees when shipping is paid. Otherwise you should add the crating charge to the purchase price when making payment via PayPal or other method.
Store Policies
Contacting us:
Buyers should use the "Ask seller a question" link at the top of the listing to request more information on an item.
We will make every attempt to answer emails promptly.
Please contact us with any questions you may have before you purchase any item.
Feedback:
We return all positive feedback after the transaction is completed.
Your satisfaction is very important to us.  Before leaving negative feedback, please contact us so we can come to an agreement that is satisfactory to both parties.
All sales are final:
All items are sold AS-IS, WHERE-IS, unless otherwise stated in the items description.
Sales Tax:
Sales tax will be charged on all items shipped to destinations within the State of Kansas.
eBay may collect sales tax directly on behalf of other states due to varying state laws.
You are purchasing the item(s) as photographed.
The Buyer is not to infer or assume that any other items or accessories are included unless outlined in the description above.
Returns
All returns are subject to the conditions as stated in the
Seller's Return Policy
section of the item listing. Returned items must be insured for the purchase value. Upon receipt of the item in its original condition we will exchange the item with an identical replacement. If no replacement is available we will refund the purchase price only. Items returned that have been damaged by the buyer will not be eligible for a refund. Shipping, handling, packaging and insurance charges are not eligible for refund unless the return is due to an error by us (i.e. wrong item shipped)
Best Offers
Many of our store items are eligible for you to make us an offer. Click on the "Make Offer" button (if available) to send us your offer on the item you are interested in purchasing. Please note that our regular business hours are Monday through Friday, except Holidays.