-40%
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES
PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES

PARKER DAEDAL TILT PLATE FOR FINE LEVEL / TRAMMING ADJUSTMENT OF LINEAR STAGES

$ 118.8

Availability: 100 in stock
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Condition: Very good condition. Removed from equipment. Minor scratches and dings. Since I have several of these the photos are representative of the leveling assembly you'll receive. Look the photos over carefully and contact me before buying if you have any questions or concerns. The Parker stage in the last 2 photos is intended as an example of the type of stages this will work with, The stage is NOT INCLUDED. Thanks.
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Restocking Fee: No
  • Model: Linear Stage Alignment level leveling sine plate
  • Country/Region of Manufacture: United States
  • Brand: PARKER DAEDAL COMPUMOTOR

    Description

    PARKER DAEDAL / COMPUMOTOR LINEAR STAGE LEVELING ASSEMBLY
    The top plate is drilled for the base of a Parker 4" wide linear stage. It could be re-drilled for other stages.
    This is built somewhat like a sine plate, if that's familiar to you, with a round bar used as a pivot.
    The adjustment screw is 80 TPI and the adjustment range is about 2mm.
    This was originally used to adjust a microscope type stage for level so as to maintain focus across the stage's range of travel. It's probably not suitable for a machining application.
    The adjustment screw pushes against a hardened insert in the bottom plate.
    The Allen head screws on the top and side are loosened to make the adjustment and then tightened to hold it.
    Overall dimensions:  12.5" x 5.06" x 1.0" H (about 2.3" H including the adjustment screw set near mid-range).
    The tilting plate is 12.5" x 3.03" x 0.5". The dowel pins may be driven out if not needed.
    About 6.5 pounds, before packing.
    Aluminum, black anodized. Very nicely finished.
    There are bosses machined into the bottom ( see photo 8) to reduce the chance of rocking if this adjuster is attached to a less than flat base plate.
    The adjustment screw may be removed for shipping. If it is you'll need a 1/2" wrench to reinstall it.
    _____________________________________
    PayPal is preferred for domestic sales.
    Sorry, no local pick-up for this item. These goods will be very well packed and delivered in good condition.
    I'm happy to combine shipping, item size and weight permitting. Please ask before bidding if this is important to you.
    California sales tax will be added for CA deliveries unless your valid resale permit is provided prior to checkout.
    Your shipping cost is based on the delivery address, insurance cost, and the size and weight of the package.
    ____________________________________
    International shipping is available for this item only through the eBay Global Shipping Program.
    Payment by PayPal is preferred.
    Customs fees, duties, or any other taxes or levies are your responsibility as the buyer. They are not included in the item's sale price but some or all of them may be included in the eBay Global Shipping Program cost. Check with eBay on this as I have no visibility or control over how much they charge or what fees or taxes are included.